Win Win Industrial Co., Ltd
Home / Machining Centers / LFD260 / LFD320 / LFD400 5-अक्ष मशीनिंग केंद्र 5AX WWI-LFD260, 5AX WWI-LFD320, 5AX WWI-LFD400
Product

LFD260 / LFD320 / LFD400 5-अक्ष मशीनिंग केंद्र 5AX WWI-LFD260, 5AX WWI-LFD320, 5AX WWI-LFD400

5-Axis Machining Centers Built Around a DD Direct-Drive Trunnion Table

The LFD260, LFD320 and LFD400 are 5-axis machining centers aimed at small, tight-tolerance parts. The machine body is cast iron or mineral cast, checked with finite element analysis so the structure holds up under cutting load instead of flexing. The A/C axes run on a DD direct-drive trunnion table — no worm gear, no backlash to chase. You get high positioning accuracy, strong torque at low speed, self-locking when the axis stops, and quieter running at high rpm.

Three models share the same platform. X stroke runs 400–700 mm, Y/Z 500–600 mm, table size Φ260–Φ400 mm, table load 50–250 kg. Spindle options are BT30 or BT40, 20,000 or 12,000 rpm, 5.5 or 7.5 kW. Tool magazine holds 21–32 tools. All three linear axes are covered by dust protection, which matters if you cut graphite, castings or abrasive composites.

  • DD direct-drive rotary table: no gear wear, no backlash adjustment, position holds when power is off
  • FEA-checked cast body — less chatter on interrupted cuts and deep pockets
  • 20,000 rpm spindle option for aluminum and small-diameter tools
  • Dust covers on X, Y and Z — longer guide and ball screw life in dirty shops
Get a Quote Back to Machining Centers
LFD260 / LFD320 / LFD400 5-अक्ष मशीनिंग केंद्र 5AX WWI-LFD260, 5AX WWI-LFD320, 5AX WWI-LFD400
#214
Highlights
Key Advantages
  • DD direct-drive A/C axes — torque holds at low rpm and the table self-locks when stopped, so you skip worm-gear backlash and the re-adjustment that comes with it.
  • Cast iron or mineral cast body, FEA-optimized: the frame resists deflection during interrupted cutting, which shows up as better surface finish on small cavities.
  • Spindle up to 20,000 rpm with BT30 or BT40 taper — suits small-diameter end mills in aluminum, brass and plastics where chip evacuation is the bottleneck.
  • X stroke 400–700 mm and table load up to 250 kg — enough envelope for multi-fixture setups without moving to a bigger, slower machine.
  • 21–32 tool magazine: keeps a full drill/tap/end mill set loaded so short cycle jobs don't stall on tool changes.
  • Dust covers on all three linear axes — protects guides and ball screws when you cut graphite, castings or abrasive composites.
Use Cases
Applications
  • Small precision parts for automotive — sensor housings, connectors, valve bodies
  • Medical instruments and implant components needing multi-face machining in one setup
  • 5-axis contouring of electronic connectors and small die-cast housings
  • Mold inserts and small cores with deep ribs or angled faces
  • Job shops running mixed batches where changeover time eats margin
  • R&D and training labs that need a compact 5-axis platform for prototype work
Specs
Technical Specifications
ModelLFD260 / LFD320 / LFD400
X-axis stroke400–700 mm
Y/Z-axis stroke500–600 mm
Rotary table sizeΦ260–Φ400 mm
A-axis tilt range±110° to -120° to 90°
A/C axis speed100/200–60/60 rpm
Rotary table load capacity≤50–250 kg
Spindle motor power5.5 / 7.5 kW
Spindle speed20,000 / 12,000 rpm
Spindle taperBT30 / BT40
Tool magazine capacity21–32 tools
Details
Detailed Description

उत्पाद विशेषताएँ: उच्च गुणवत्ता वाले कच्चे लोहे की ढलाई या खनिज ढलाई का उपयोग, मशीन बॉडी को परिमित तत्व विश्लेषण द्वारा उत्कृष्ट यांत्रिक प्रदर्शन तक पहुँचाया गया; DD डायरेक्ट-ड्राइव पाँच-अक्ष झूला रोटरी टेबल, जिसमें उच्च सटीकता, उच्च संचरण टॉर्क, स्थिति स्व-लॉक, कम शोर, उच्च गति प्रदर्शन आदि लाभ हैं; तीन अक्षों में उच्च गुणवत्ता वाले धूल कवर का उपयोग, अच्छी सुरक्षा। मॉडल: LFD260/LFD320/LFD400; तीन-अक्ष स्ट्रोक X 400-700mm, Y/Z 500-600mm; रोटरी टेबल आकार Φ260-Φ400, झुकाव ±110°~-120°~90°, A/C अक्ष गति 100/200-60/60rpm, रोटरी टेबल भार क्षमता ≤50-250kg; स्पिंडल मोटर 5.5/7.5kw, गति 20000/12000r/min; BT30/BT40 स्पिंडल, टूल मैगज़ीन क्षमता 21-32 पीस।

FAQ
FAQ
How do I choose between the LFD260, LFD320 and LFD400?
It comes down to part size and weight. The LFD260 has the smallest envelope and load rating, the LFD400 the largest — X stroke goes from 400 to 700 mm and table load from 50 to 250 kg. All three use the same DD direct-drive table design and spindle options, so the decision is mostly about whether your parts fit and how heavy your fixtures are.
Can it cut titanium or hardened steel, or is this an aluminum machine?
The 20,000 rpm BT30 configuration is happiest in aluminum, brass and plastics. For titanium, stainless and harder steels, go with the 12,000 rpm BT40 spindle and 7.5 kW motor — lower speed, more torque. Tell us your material and we'll match the spindle and coolant setup to it rather than shipping a generic spec.
What's the lead time, and how is the machine shipped?
Typically 60–90 days from order confirmation, depending on configuration and options. Machines ship in export packing by sea, and we handle the documentation. Give us your destination port and we'll confirm the exact schedule before you commit.
Do you support installation and operator training?
Yes — on-site installation, commissioning and operator training are available, and we can do remote support over video for troubleshooting after startup. If you already run 5-axis machines, we can skip the basics and focus the training on the DD table and your specific part programs.
What inspection does each machine go through before shipment?
Every unit gets geometric accuracy checks, spindle run-out measurement and a dynamic test run before it leaves. We can send the inspection report with the machine, and if you want a third-party inspection or a witnessed test cut on your own part, arrange it with us at order stage.
Stock
Check Stock & Get a Quote
Send us your part drawings, material and batch size. We'll come back with the right model, spindle option and fixture suggestion — plus a price and lead time. No generic spec sheet, just what fits your job.
Send Inquiry