Home/ 加工中心/ LFD200D / LFD300D / LFD400D 5-Axis Machining Center 5AX WWI-LFD200D、5AX WWI-LFD300D、5AX WWI-LFD400D

加工中心

LFD200D / LFD300D / LFD400D 5-Axis Machining Center 5AX WWI-LFD200D、5AX WWI-LFD300D、5AX WWI-LFD400D

A 5-axis gantry machine built around a DD rotary table

Here is the short version of what the LFD200D, LFD300D and LFD400D are: three 5-axis machining centers sharing one gantry mono-frame build, sized by X travel and rotary table diameter. The base and column are cast iron, then checked by FEA during design so the structure holds its shape under heavy cuts instead of flexing.

The DD rotary table is the part that sets these machines apart. Direct drive means no worm gear, no backlash to adjust, and positioning that locks without extra clamping. The A/C axes run at 60 and 350 rpm, so the table keeps up with contouring work rather than slowing it down.

X travel 600 / 800 / 500 mm — Y 800 mm — Z 400 mm
Rotary table Φ200 to Φ400 mm, tilt ±120°
Spindle: BT40, 20 kW, 20000 rpm
Tool magazine: 32 tools
T-shaped base, table set close to the door for loading

Request a Quote View Specs

#211 · SKU

LFD200D / LFD300D / LFD400D 5-Axis Machining Center 5AX WWI-LFD200D、5AX WWI-LFD300D、5AX WWI-LFD400D

Key Advantages

Built for Reliability in the Field

Each part is engineered and QC'd against the exacting standards your equipment demands.

Gantry mono-frame in cast iron, FEA-checked at the design stage

The point is less vibration at the tool tip and stable geometry through a long roughing cycle, which shows up in surface finish and tool life.

DD direct drive trunnion table

With no gear reduction there is no backlash to compensate, positioning is self-locking, and noise stays low even at the higher C-axis speeds. One less wear item to service.

T-shaped base with the worktable pushed toward the door

Operators load and unload with the crane or hoist directly over the table instead of reaching deep into the enclosure — shorter setups on heavy parts.

Feature

Engineered Around Your Workflow

X travel 600 / 800 / 500 mm — Y 800 mm — Z 400 mm
Rotary table Φ200 to Φ400 mm, tilt ±120°
Spindle: BT40, 20 kW, 20000 rpm
Tool magazine: 32 tools
T-shaped base, table set close to the door for loading

Feature

Where It Works

Aerospace brackets and structural parts that need undercut geometry and multi-sided features in one setup.
Automotive and powertrain components where tolerance and cycle time both matter, especially parts with angled holes and faces.
Medical instruments and implants, where surface finish and repeatable positioning carry more weight than raw metal removal.
Mold and die work with deep cavities and fine detail, including the small cutters that need a stable frame to run cleanly.
Job shops running mixed batches — the 32-tool magazine and 5-axis table cut down on re-fixturing between jobs.

Real World

Trusted Across Industries

From mining fleets to manufacturing lines, this part ships globally and runs under load.

Proven in thousands of installations across mining, construction, energy and heavy manufacturing. Designed for 24/7 operation and backed by a responsive engineering support team.

Gallery

Detailed Visual Reference

Inspect every critical surface, tolerance and finish before you commit.

LFD200D / LFD300D / LFD400D 5-Axis Machining Center 5AX WWI-LFD200D、5AX WWI-LFD300D、5AX WWI-LFD400D gallery

GUARANTEED RESPONSE

Reply Within 24 Hours

Compatibility check against your machine model
Unit price + MOQ + stock status
Lead time & worldwide shipping options
Datasheet, drawing & certificate package

Submit RFQ Now →

Specifications

Technical Specifications

Key parameters below. Full dimensional drawings, tolerance sheets and material certificates available on request.

Models

LFD200D / LFD300D / LFD400D

X-axis Travel

600 / 800 / 500 mm

Y-axis Travel

800 mm

Z-axis Travel

400 mm

Rotary Table Size

Φ200 – Φ400 mm

Tilt Angle

±120°

A/C Axis Speed

60 / 350 rpm

Spindle Motor Power

20 kW

Spindle Speed

20000 rpm

Spindle Taper

BT40

Tool Magazine Capacity

32 tools

FAQ

Questions Buyers Often Ask

LFD200D, LFD300D or LFD400D — how do I pick?

Start with the largest part you will actually cut. X travel is 600 mm on the LFD200D, 800 mm on the LFD300D and 500 mm on the LFD400D, and the rotary table runs Φ200 to Φ400 mm depending on the model. Send us a drawing or the part envelope and we will tell you which frame fits and where the clearance gets tight.

What does direct drive on the rotary table actually change for me?

No worm gear means no backlash to compensate and no gear wear to service. Positioning is self-locking, and the table runs quieter at speed, with A/C speeds of 60 and 350 rpm. In practice you get consistent accuracy on contoured surfaces over the life of the machine, not just on day one.

Is the 20 kW BT40 spindle enough for steel?

It handles steel, stainless and titanium, along with aluminum. The 20000 rpm top speed suits smaller cutters and finishing passes. If your work is heavy steel removal most of the day, say so when you inquire — we will look at your cut depths and material removal rate rather than just quote the spindle on paper.

What is the lead time?

Usually 60 to 90 days, depending on the configuration and how many units are on the order. Ask your sales contact to confirm against the current production schedule before you plan installation.

How is the machine checked before it ships?

Each unit goes through assembly checks, geometric accuracy testing and a run-off before shipment, and ships with an inspection report. If you want a third-party inspection, we can arrange it — just tell us which standard or inspection body your purchasing team requires.

Can it be adapted to our automation or fixtures?

Yes. Automation interfaces, extra tooling and special fixtures can be worked into the build. Send your requirements to our engineering team early in the process so the changes go in at the factory, not after the machine is on your floor.