5-Axis Machining Centers LFD200D/LFD300D/LFD400D | WWI 5AX Gantry BT40-Win Win Industrial Co., Ltd

Highlights

Key Advantages

The cast iron frame goes through finite element analysis before build, so the gantry and base resist deflection during heavy cuts and hold accuracy over long runs.
DD direct-drive rotary table: no worm gear backlash to compensate, self-locks at position, and keeps noise low even at high A/C axis speeds.
Worktable sits near the door edge on a T-shaped base — loading and unloading heavy parts takes less time and less operator strain.
BT40 spindle at 20 kW and 20,000 rpm covers both roughing and finishing in one setup, so fewer part transfers and less re-fixturing.
32-tool ATC lets you run multi-process 5-axis jobs back to back without stopping to swap tools by hand.

Use Cases

Applications

Aerospace structural parts and complex components that need multi-sided machining in one setup.
Molds and dies where surface finish and dimensional accuracy drive the job.
Medical device and precision instrument parts with tight tolerances and small features.
Automotive and energy parts with angled holes, pockets, and features on multiple faces.
General precision engineering work on complex geometries that would otherwise need several operations.

Specs

Technical Specifications

Models	LFD200D / LFD300D / LFD400D
Structure	Single gantry, high-quality cast iron, FEA-optimized
X/Y/Z Travels	600/800/500 mm (X), 800 mm (Y), 400 mm (Z)
Rotary Table Size	Φ200–Φ400 mm
Tilt/Swivel Angle	±120°
A/C Axis Speed	60/350 rpm
Spindle Type	BT40
Spindle Power	20 kW
Spindle Speed	20,000 rpm
ATC Capacity	32 tools

Details

Detailed Description

مزايا المنتج: مسبوكات من الحديد الزهر عالية الجودة، هيكل جسم بتصميم بوابة متكامل framework، تم تحليله بالعناصر المحدودة للوصول إلى أداء ميكانيكي ممتاز؛ طاولة دوارة مهدية خماسية المحاور بمحرك مباشر DD تتميز بدقة عالية وعزم دوران نقل كبير وقفل ذاتي في التموضع وضوضاء منخفضة وأداء فائق في السرعات العالية؛ تعتمد قاعدة على شكل حرف T، مع اقتراب طاولة العمل من حافة الباب لتسهيل التحميل والتفريغ. الطرازات: LFD200D/LFD300D/LFD400D؛ مشوار المحاور الثلاثة X 600/800/500mm، Y 800mm، Z 400mm؛ أبعاد الطاولة الدوارة Φ200-Φ400، زاوية الإمالة والدوران ±120°، سرعة دوران المحورين A/C 60/350rpm؛ محرك المغزل 20kw، سرعة الدوران 20000r/min؛ مغزل BT40، سعة مخزن الأدوات 32 أداة.

FAQ

How do I choose between the LFD200D, LFD300D, and LFD400D?

Start with your largest workpiece. X travel is 600/800/500 mm across the three models, and rotary table size runs from Φ200 to Φ400 mm. If your parts are small and you need the fastest A/C indexing, the smaller table makes sense. For bigger parts that need more X room, step up. Spindle, ATC, and gantry structure are the same across all three.

Does the DD rotary table need frequent maintenance?

The direct-drive table has no worm gear or belt to wear, so there is no backlash adjustment to schedule. Normal care is keeping the table surface and clamping area clean and following the lubrication intervals in the manual. That means less downtime for adjustment compared with geared tables.

Can this machine handle both roughing and finishing?

Yes. The 20 kW BT40 spindle at up to 20,000 rpm covers a wide range, and the cast iron gantry frame is stiff enough for heavier roughing passes. Many shops run rough and finish on the same setup, which cuts fixturing time and keeps datums consistent.

What is the lead time?

It depends on the model, options, and current order queue. Send us your configuration and we will confirm a delivery date rather than quote a generic number.

How is the machine tested before shipment?

Each unit is assembled and checked for geometry, spindle runout, and axis positioning before it ships. We can share the inspection records with your order so you know what was measured.

LFD200D / LFD300D / LFD400D مركز التصنيع الخمسة محاور 5AX WWI-LFD200D، 5AX WWI-LFD300D، 5AX WWI-LFD400D